Справочник Пользователя для Pelco C2458M-E

6

C2458M-E  (10/06)

To interface with a Spectra dome drive or IPS-RDPE-2 remote data port using a Windows-based PC, 
first install the control/upload utility and then install the IPS-CABLE. 

The control/upload utility is compatible with the following operating systems: 

Windows

®

 95

Windows 98 
Windows ME
Windows 2000 
Windows XP 
Windows NT

®

 with service pack 6 

NOTE: Know how to operate a Windows-based PC before attempting to control or upload software 
using the interface cable (IPS-CABLE). 

1. Insert the Resource CD into the CD drive. The main menu appears on the monitor.

NOTE: If autoplay is not enabled on your system, you need to navigate to the CD drive and select 
Start to open the main menu.

2. Click the Control/Upload Utility button for Spectra, Esprit, or ExSite. The Install Shield Wizard 

starts.

3. Follow the instructions displayed on the monitor.

To install the IPS-cable, refer to Figure 1 and do the following: 

1. Connect a null modem cable (not supplied) to the COM1 or COM2 serial port on the PC. 

2. Connect the 9-pin male connector from the IPS-CABLE to the null modem cable. 

3. Connect the IPS-CABLE to the RJ-45 port of the Spectra dome drive or IPS-RDPE-2.

NOTE: When connected, the IPS-CABLE will interrupt control from the normal control source.