Справочник Пользователя для D-Link DCS5020L

Make sure the camera is plugged in, then press and hold the WPS button for 

ten seconds. The blue WPS status LED will start blinking.

Press the WPS button on your router within 60 seconds. The WPS button is 

usually on the front or side of your router. If you are not sure where the WPS 

button is on your router, please refer to your router’s User Manual.

The DCS-5020L will automatically create a secure wireless connection to your 

router. While connecting, the blue LED will flash and your camera will reboot.

If your router supports Wi-Fi Protected Setup (WPS), you can create a secure wireless connection using the WPS button on the 

back of the camera. Note that WPS setup only establishes a secure wireless connection and you will still need to run the Setup 

Wizard to configure your camera and register it with mydlink.