Справочник Пользователя для D-Link DCS5020L
19
D-Link DCS-5020L User Manual
19
Section 3 - Configuration
Configuration
Using the Web Configuration Interface
After completing the Camera Setup Wizard, your camera is ready to use. The camera’s built-in web configuration interface is
designed to allow you to easily access and configure your DCS-5020L. There are two ways in which you can access your camera’s
web configuration interface:
1. Log in to your mydlink account to access your camera’s configuration interface.
2. You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
2. You can also access the interface locally by entering the IP address of your camera into a web browser, such as Internet
Explorer. To log in, use the User name admin and the password you created in the Setup Wizard. If you did not create a
password, leave the password field blank. After entering your password, click OK.
Note: If you are directly connecting your camera to your PC, or if you are using the camera on a closed network, the default IP is
192.168.0.20. If the camera is connected to a router or network, a different IP address may have been assigned.
DCS-5020L