Справочник Пользователя для Pelco IS20CHV10S

C3472M-C (9/10)

13

The mounting requirements are shown as follows:

*Make sure that the installed mount bracket can support more than five times the weight of the camera.

1. Install the 2-gang junction box (not supplied) onto the wall/ceiling. 

a.

When using a 2-gang junction box (4 x 4 inches), procure one locally that meets the dimensions in 
Figure 6.

b.

Locally procure four camera mounting screws suitable for the installation surface and structure of the 
wall/ceiling or 2-gang junction box.

2. Mount the camera onto the 2-gang junction box with four screws (not supplied). 

3. Fasten all of the mounting screws (refer to Figure 6).

Figure 6. Mounting the Camera to a 2-Gang Junction Box

Ceiling/wall

Two-gang junction 
box

M4 (or appropriate),
1.6 N·m (16 kgf·cm)

4 pcs.

196 N/pc.(20 kgf/pc.)

Ceiling/wall

Surface mount

M4 (or appropriate),
1.6 N·m (16 kgf·cm)

4 pcs.

196 N/pc.(20 kgf/pc.)

Ceiling

Flush mount

–

–

*

ì

46 mm (1.81 inches)

î

83.5 mm (3.27 inches)