Справочник Пользователя для JVC TK-C215VP4

Precautions regarding water-proof and 
dust-proof
䡵 Fill the hole with sealing material

Fill the piping hole as well as the 2 mounting 
holes mounted with screws using a sealing 
material.

● Use GE silicon or its equivalents as the 

sealing material.

● If the piping hole and the 2 mounting holes 

mounted with screws are not filled with 
sealing material completely, water or vapor 
may enter the holes causing the lens and 
dome cover to fog. Make sure that these 
holes are completely filled.

䡵 Inserting the silica gel supplied

Take out the silica gel from the aluminum 
package, insert it into the silica gel insertion 
space of the camera unit and fasten using the 
lug plate.

● During reconnection or re-installation after 

repair or maintenance, make sure to replace 
the silica gel with a new one.

● Consult your nearby JVC’s dealer on the 

replacement procedures.
Serial number of part to be replaced: Use a 
LW40500-001A silica gel.

● When mounting is performed on a rainy day, 

make sure that rain water does not enter this 
unit.

● Make sure to use the silica gel supplied. 

Failure to do so may cause the camera lens 
and dome cover to fog.

● If the angle of view is not adjusted 

immediately after mounting the camera, 
insert the silica gel after adjustment is 
completed. The silica gel loses its effect if it is 
exposed to the air for a prolonged period of 
time.

Sealing Material

Silica Gel Insertion 
Space

Silica Gel

Lug Plate

TK-C215VP4_JP.book  Page 3  Wednesday, September 20, 2006  6:02 PM