Справочник Пользователя для Petsafe PIG00-10773

14 

Lightning strikes that occur even several miles away from your installation can 
create power surges or spikes which may damage your unprotected electronic pet 
containment system. The Surge Protector included with this system is designed to 
protect your In-Ground Fence

™

 from surges or spikes that can reach it via your AC 

power connection and/or your buried Boundary Wire.

Do not install, connect, or remove your system during a lightning 

• 

storm. If the storm is close enough for you to hear thunder, it is
close enough to create hazardous surges.
Turn off power to outlet before you install or remove your

• 

Surge Protector.
Risk of electrical shock or fi re. Use Surge Protector only with a 

• 

duplex outlet with center screw. Attach unit with long screw supplied.
Risk of electric shock. Use the Fence Transmitter and Surge 

• 

Protector indoors in dry location only.

Do not install the Surge Protector if there is not at least 30 feet

• 

(10 meters) or more of wire between the electrical outlet and 
electrical service panel.

If possible, DO NOT use an AC circuit protected with a GFCI 

• 

(ground fault circuit interrupter). In rare cases, nearby lightning 
strikes may cause the GFCI to trip. Without power your dog may 
be vulnerable to escape. You will have to reset the GFCI to restore 
power to the system.

Plug the Surge Protector into a grounded (3-prong) outlet that is 

• 

within 5 feet of the Fence Transmitter. ALWAYS use a grounded 
(3-prong) outlet to ensure maximum protection.
Do not remove the ground prong from the Surge Protector plug. 

• 

Do not use a 3-prong plug to 2-prong outlet converter. Doing so 
will make the Surge Protector ineffective against surges or spikes.

4