Справочник Пользователя для Barco MDNC 4130

Configuring Windows

65

To set the resolution of the second display attached to the  
B

ARCO

MXRT display controller you are working with, go back to 

the “Settings” tab of the “Display Properties Control Panel”. If 
necessary attach the second display you detached in step 2 
above, by right clicking on the rectangle that represents it and 
selecting Attached.

Now repeat steps 5-8 above for this display.

If you are using a Quad-Head Configuration repeat all of the 
above steps for the two displays on the second display 
controller.

Note: If you have a single display configuration and you have 
enabled DualView, Windows will not allow you to attach the 
second head. This is normal and not a bug.

After enabling DualView and setting the resolutions in a Quad-
Head Configuration you may need to drag the heads into the 
proper position in the window on the “Settings” tab, so that the 
arrangement in the window on the “Settings” tab matches the 
physical arrangement of your configuration.

(See Barco Controller Control Panel Settings section in this manual)

Note: In order to configure the Windows Desktop of your B

ARCO

 

N

IO

 F

USION

 Display System you must be logged in using an 

account with administrator privileges.

If you are using a color display in conjunction with your Barco 
grayscale display(s) you should configure your desktop before setting 
the resolution of the your Barco grayscale display(s).