Справочник Пользователя для Radware VOYA-GRAND-MBK

Page  24

7075-166

September 25, 2012

R

Removing Tube Channel Assembly
1. Remove the 3 right side bricks.
2. Remove the baffle protection channel by bending back the tabs

using needle nose pliers located at the right and left side of the 

protection cover.  Lift the cover up slightly and pull toward the 

front and out of the firebox.

3. Locate the 2 channel nuts and two bolts inside of chamber and 

remove using a 7/16 socket wrench.

NOTE: Soak the bolts with penetrating oil for at least 15 minutes

before trying to remove them.

4. Slide the tube channel assembly all the way to left until it is off the

threads. Drop the right side down, then slide the assembly back

to right.  

5. The ceramic blanket and both baffle boards can be removed at

the same time you remove the tube channel assembly.

6. When the tube channel assembly is free of the left side sup-

port, rotate clockwise and pull assembly, blanket and baffles out

through the front opening.

7. Re-install in reverse order.

Baffle Protection 

Channel

Bend Back Tabs

Use 7/16 Socket Wrench 

and Remove Channel Nuts

Tube 

Channel 

Assembly

2 Tube Channel Nuts

Ceramic Blanket

Baffle

Protection Channel 

2 Baffle Boards