Справочник Пользователя для Radware VOYA-GRAND-PMH

September 25, 2012

7075-166

Page  29

R

To provide reasonable fire safety, the following should be

given serious consideration:

1.  Install  at  least  one  smoke  detector  on  each  floor  of

your  home  to  ensure  your  safety.    They  should  be

located away from the heating appliance and close 

to  the  sleeping  areas.    Follow  the  smoke  detector

manufacturer’s placement and installation instructions, 

and be sure to maintain regularly.  

2.  A  conveniently  located  Class A  fire  extinguisher

to contend with small fires resulting from burning 

embers.

•  Remove appliance and components from packaging and

inspect for damage.

•  Vent  system  components  and  doors  are  shipped  in

separate packages.

•  Report to your dealer any parts damaged in shipment.
•  Read  all  the  instructions  before  starting  the 

1.

Place the appliance in a location near the final

installation area and follow the procedures below:

2.

Open the appliance and remove all the parts and

articles packed inside the Component Pack. Inspect

all the parts and glass for shipping damage. Contact

your dealer if any irregularities are noticed.

3.

All safety warnings have been read and followed.

4.

This Owner’s Manual has been read.

5.

Floor protection requirements have been met.

6.

Venting is properly installed per vent manufacturing

instructions.

7.

The proper clearances from the appliance and chim-

ney to combustible materials have been met.

8.

The masonry chimney is inspected by a professional

and is clean, or the factory built metal chimney is 

installed according to the manufacturer’s instruc-

tions and clearances.

9.

The chimney meets the required minimum height.

10.

All labels have been removed from the glass

door.

11.

Plated surfaces have been wiped clean, if appli-

cable.

12.

A  power  outlet  is  available  nearby  for  use  of  the

blower assembly.

Inspect appliance and components for damage. 

Damaged parts may impair safe operation.

•  Do NOT install damaged components.

•  Do NOT install incomplete components.

•  Do NOT install substitute components.

Report damaged parts to dealer.

7/16 Socket

Framing materia

Reciprocating saw

High temp caulking material l

Pliers Gloves
Hammer

Framing square

Phillips screwdriver

Electric drill and bits

Flat blade screwdriver  Safety glasses
Plumb line

Tape measure

Level
Wire Cutters to remove from pallet
1/2-3/4 in. length, #6 or #8 self-drilling screws
Misc. screws and nails

Before beginning the installation be sure the following tools 

and building supplies are available: