Справочник Пользователя для Husqvarna 16 AWD

English

 – 23

Check that the parking brake is adjusted correctly by placing 
the machine on a slope with the front and rear axles 
disengaged. Apply and lock the parking brake. When the 
machine does not stand still, the parking brake should be 
adjusted according to the following.

1

Remove the left-hand wing cover.

1

 Loosen the locking nuts (1).

2

Tension the cable using the adjuster screw (2) until the 
play in the cable is taken up.

3

Tighten the locking nuts (1).

4

The brake should be checked again after adjustment

5

Assemble the left-hand wing cover.

The throttle cable may need to be adjusted, if the engine does 
not respond as it should when accelerating, if it produces 
black smoke or maximum revs are not reached.

1

Release the clamping screw that secures the wire casing 
and set the choke control to maximum choke.

2

Pull the choke wire casing to the far right and tighten the 
clamping screw.

3

Pull back the throttle to the full throttle position and check 
that the choke is no longer actuated.

If the engine seems to lack power or does not run smoothly 
this may be because the air filter is clogged. It is therefore 
important to replace the air filter at regular intervals (see 
Maintenance/Maintenance Schedule for the correct service 
interval).

Replace the air filter as follows:

1

Open the engine cover.

2

Pull up the handle on the air filter cover, unhook and turn 
towards the engine.

3

Remove the air filter cover.