Справочник Пользователя для Nilfisk-Advance America C 125.3

13

WARNING! Always disconnect 
the electrical plug from the 
socket prior to maintenance or 
cleaning. 

To ensure a long and problem 
free working life, please take 
the following advice:

 Wash out water hose, high 

pressure hose, spray lance 
and accessories before 
mounting.

 Clean the connectors of dust 

and sand. 

 Make sure that no sand or 

dirt is blocking the movement 
of the pawl on the Click & 
Clean spray lance. Rinse ac-
cording to requirement.

 Rinse the detergent spraying 

attachment after use.

 Clean the nozzles.

Any repair should always be 
made in an  authorized work-
shop with original spare parts.

Clean the water inlet fi lter 
regularly once a month or more 
frequently according to use. 
Carefully loosen the fi lter with a 
screwdriver and clean it. Check 
that it is intact before re-mount-
ing it. 

The inlet fi lter must always be 
fi tted inside the water inlet pipe 
to fi lter out sand, limestone and 
other impurities, as they will 
damage the pump valves.

CAUTION: Failure to fi t the fi lter 
will invalidate the guarantee.

A clogging up in the nozzle 
causes a pump pressure which 
is too high. This is why cleaning 
is required immediately.
 
1. Stop the machine and dis-

connect the  nozzle. 

2. Clean the nozzle. IMPOR-

TANT: The cleaning tool (11) 
should only be used when 
the nozzle is detached!

3. Flush the nozzle backwards 

with water.