Справочник Пользователя для Nilfisk-Advance America C 125.3

11

To avoid accidents, the electric 
cable and the high pressure 
hose should always be winded 
carefully up.

Wind up the electric cable and 
the high pressure hose on the 
appropriate hooks. Built-in clip 
for good holding.

The high pressure washer 
comes in two models: A) with 
hook for storage of high pres-
sure hose (14) - B) with a hose 
reel (13), where the hose is 
pushed into the reel and after-
wards winded up.

Pump, hose and accessories 
should always be emptied of 
water prior to storing as follows:

1. Stop the machine (turn 

the start/stop switch (1) to 
position"O") and detach wa-
ter hose and accessory.

2. Restart the machine and 

activate the trigger. Let the 
machine run until no more 
water runs through the spray 
gun.

3. Stop the machine, unplug 

and wind up hose and cable. 

4. Place spray handle, nozzles 

and other accessories in the 
holders of the machine.

Should the machine by mistake 
be frozen, it will be necessary 
to check it for damage.

NEVER START-UP A FROZEN 
MACHINE.

C 120.5 X-TRA

C 120.3

C 125.3 

C 120.3

C 125.3

 

C 120.5 X-TRA