Справочник Пользователя для Netopia ISDN Router

Note: Alternatively, you can have a direct serial console cable connection using the provided console cable 
for your platform (PC or Macintosh) and the “Console” por t on the back of the router. For more information 
on attaching the console cable, see 

 below.

■

Telnet software installed on the computer you will use to configure the router

If you are configuring your router using a Telnet session, your computer must be running a Telnet software 
program.

■

If you connect a PC with Microsoft Windows, you can use a Windows Telnet application or simply run Telnet 
from the Star t menu.

■

If you connect a Macintosh computer, you can use the NCSA Telnet program supplied on the Netopia R310 
CD. You install NCSA Telnet by simply dragging the application from the CD to your hard disk.

You can per form all of the System Configuration activities for your Netopia R310 through a local serial console 
connection using terminal emulation software, such as HyperTerminal provided with Windows 95 or 98 on the 
PC, or ZTerm, included on the Netopia CD, for the Macintosh.

The Netopia R310 back panel has a connector labeled “Console” for attaching the Router to either a PC or 
Macintosh computer via the serial por t on the computer. (On a Macintosh, the serial por t is called the Modem 
por t or the Printer por t.) This connection lets you use the computer to configure and monitor the Netopia R310 
via the console screens.

To connect the Netopia R310 to your computer for serial console communication, use the supplied dual console 
cable connector end appropriate to your platform:

■

one DB-9 connector end attaches to a PC

■

the mini-DIN8 connector end attaches to a Macintosh

■

the DB-9 end of the Console cable attaches to the Netopia R310’s Console por t

If you are configuring your router via a terminal session, your computer must be running a standard terminal 
emulation or communications software program, such as those used with modems.

■

If you connect a PC with Microsoft Windows 95 or NT, you can use the HyperTerminal application bundled 

Console por t

Power

Console

Line