Справочник Пользователя для Mitsubishi Electronics 60/60S
3. Tool Offset (M system)
3.1 Tool Offset
I-114
Refer to "3 (I). Tool Offset (L system)" for L system.
Example of setting tool offset data in absolute mode
Radius comp.
Absolute value 3.0
setting
Absolute value 3.0
setting
Length
comp.
40.0
comp.
40.0
Old New
Radius comp.
5.0
Length comp.
Absolute value setting
37.0
Absolute value setting
37.0
Display
#3 40.000
Setting Display
# ( 3) ( 37) #3 37.000
# ( 3) ( 37) #3 37.000
(#3 length compensation data)
(b) Incremental value setting
Change to the incremental value setting mode as follows:
[TOOL OFFSET]
#A:ABS.
#I:INC.
Enter I in # ( ), then press the
INPUT
key.
# ( I) DATA( )
# ( I) DATA( )
"#I: INC." is displayed in reverse video indicating
that the incremental value setting mode is valid.
that the incremental value setting mode is valid.
Example of setting tool offset data in incremental value setting mode
Radius comp.
Incremental -2.0
value setting
Incremental -2.0
value setting
Length
comp.
40.0
comp.
40.0
Old New
Radius comp.
5.0
Length comp.
Incremental
value setting
-3.0
Incremental
value setting
-3.0
Display
#3 40.000
Setting Display
# ( 3) ( -3) #3 37.000
# ( 3) ( -3) #3 37.000
(#3 length compensation data)
The mode thus set is retained even after the screen is changed or after power has been turned OFF.