Справочник Пользователя для Mitsubishi Electronics 60/60S

3.  Tool Offset (M system) 

3.3  Tool Life 

 

 

 

I-128 

Refer to "3 (I). Tool Offset (L system)" for L system.

 

Display item 

Explanation 

Setting range 

FORM 

(c) Tool length offset data format 
   0:  Offset number 
   1:  Addition offset amount 
   2:  Direct offset amount 
The functions are the same as in (b) above. 

 

L-CMP 
R-CMP 

These depend on the data format specified in "FORM". Compensation 

number 
1 to 400 
Addition 
compensation 
amount 
±1 to 99999.999   
Direct compensation 
amount 
±1 to 99999.999 

AUX 

This depends on the machine maker specifications. 

0 to 65535 

LIFE 

Life of each tool. It is displayed in the use time 
(minutes), mount count (the number of times the tool 
has been mounted on the spindle), or work count (the 
number of times hole drilling has been performed) as 
specified in "FORM". 
If it is set to 0, life infinity is specified. 

Use time 
0 to 4000 (min) 
Mount count 
0 to 9999/65000 
(times) 
Work count 
0 to 9999/65000 
(times) 

USE 

Use data of each tool is displayed in the form as 
specified in FORM (a. Tool life control mode). 

Use data is not counted during machine 

 

 

lock, miscellaneous function lock, dry run,  

 

 

or single block mode. 

Use time 
0 to 4000 (min) 
Mount count 
0 to 9999/65000 
(times)  Work count 
0 to 9999/65000 
(times) 

(Note)  The No. of uses/No. of mounts depends on the model.