Справочник Пользователя для Mitsubishi Electronics 60/60S

4.  Parameters (User) 

4.1  Workpiece Coordinate 

 

 

 

I-134 

 

Display item 

Explanation 

#A: ABS. 
#I : INC. 

The currently effective one of the setting modes (absolute and 
incremental) is displayed in reverse video. 
Before setting data, check the mode. 

 
 
 

 
 

(1)  Enter the number corresponding to the workpiece coordinate system in # (   ), put offset data in DATA 

(   ), then press the 

 

 

INPUT 

 key. This defines workpiece coordinate system offset data. 

 

(2)  The workpiece coordinate system offset data thus defined is then displayed at the position of the 

workpiece coordinate system and the number in # (   ) changes to the next setting number and the data 
in DATA (   ) disappears. 

 

(3)  The number displayed in # (   ) is incremented and decremented by pressing the arrow keys 

 

 

 

 

 

 

. 

 (4) 

Typing 

 

 

 

 in # (   ) and pressing the 

 

 

INPUT

 key puts the setting mode to the incremental mode. Data 

entered in the incremental mode is added to the data in the setting field. 

  

Typing 

 

 

A 

 in # (   ) and pressing the 

 

 

INPUT

 key cancels the incremental mode and restores the absolute 

mode. 

 
 

 
 

By measuring the coordinate system deviation with an external touch sensor, etc., all workpiece coordinate 
systems G54 to G59 can be offset. 

 

External workpiece coordinate system data can be defined in one of two ways: inputting external data 
directly to the external offset (EXT) or entering it into the setting field on the screen (EXT). 

 

The setting method is the same as for workpiece coordinate system offset data. 

 
 

 
 

As with the POSITION screen, data of each axis displayed at the [MACHINE] on the WORK OFFSET 
screen indicates the current machine position in reference to the zero point on the basic machine coordinate 
system; it cannot be changed on this screen.