Справочник Пользователя для Mitsubishi Electronics 60/60S

5. Program

5.6 PLAYBACK

I-197

(b) Editing a stored program in playback mode

(1) Display the EDIT screen.

Press the

EDIT

MDI

key, then press

menu keys

EDIT

and

MAKE LARGE FILE

O ( ) N ( )-( )

The setting area for "SEARCH" is displayed.

MAKE LARGE FILE

O 100 PLAYBACK

N5 G01 X50. Y50.;
N6 X10. Y10. Z10;

EDIT

[MACHINE] [PLAYBACK:ABS]

X 10.100 X 0.000
Y 20.125 Y 0.000
Z 0.000 Z 0.000

[MEMORY]
N5 G01 X50. Y50;
[ADD]

Press the playback switch prepared
on the machine side.

Set the numbers of the program and
sequence to call in the data setting
area, then press the

INPUT

key.

(Example) O ( 100) N ( 5) - ( )

1) The specified program is searched from the

beginning of the block containing the specified
character string, then the program is displayed
with the block placed on the top.

2) A cursor is placed on the top of the character

string displayed.

3) Program editing starts with the block next to the

specified one. The specified block is displayed
in the [MEMORY] field.

4) Another cursor is displayed in the [ADD] field,

allowing the program to be edited.

In either creating and editing a new program or editing a stored program in playback mode, select the
PROGRAM screen and perform editing on the screen. Editing in playback mode is performed using the
[ADD] field displayed on the right side on the screen. This therefore prevents the machining program
displayed on the left half on the screen from being edited.

The cursor displayed on the left screen indicates the block displayed in the [MEMORY] field on the right
screen.

Press menu key

again, then repeat the operation described under item (2) .