Справочник Пользователя для Mitsubishi Electronics 60/60S
6. Daily Maintenance and Periodic Inspection and Maintenance
6.3 Replacement Methods
III-40
6.3 Replacement Methods
6.3.1 Cable
If the cable is replaced without turning the power OFF, the normal unit or peripheral devices could be
damaged, and risks could be imposed.
Disconnect each cable with the following procedures.
(a) For the following type of connector, press the tabs with a thumb and forefinger in the direction of the
arrow, and pull the connector off.
Y
(1) Press
(1) Press
(2) Pull
(2) Pull
(1) Press
(1) Press
(2) Pull
(2) Pull
View from above
Do not connect or disconnect the connection cables between each unit while the
power is ON.
power is ON.
Do not connect the cable by pulling on the cable wire.
CAUTION