Справочник Пользователя для Toshiba e-STUDIO4500c/5500c

April, 2007 

SERVICE CALL CONDITIONS 

 

At locations where the machine contains sensitive data, the service engineer 
cannot operate the machine until the Administrator turns the service mode lock off. 
This function makes sure that work on the machine is always done with the 
permission of the Administrator. 

1.  If you cannot go into the SP mode, ask the Administrator to log in with the 

Operator Tool and then set “Service Mode Lock” to OFF. After he or she logs 
in: 

Operator Tools > System Settings > Administrator Tools > Service Mode Lock 
> OFF 

•

  This unlocks the machine and lets you get access to all the SP codes. 

•

  The Service engineer can do servicing on the machine and turn the 

machine OFF and ON. It is not necessary to ask the Administrator to log in 
again each time the machine is turned ON. 

2.  If you must use the printer bit switches, go into the SP mode and set SP 5169 

to “1”.  

3.  After machine servicing is completed: 

•

 Change 

SP 5169 from “1” to “0”.  

•

  Turn the machine OFF and ON. Tell the administrator that you completed 

servicing the machine. 

•

  The Administrator will then set the “Service Mode Lock” to ON.