Справочник Пользователя для Marathon Computer AACC 2000

AACC 2000 Carbon                                                                       Nov.  1, 1997

64

 

 Selecting configuration level

 

There are two alternative methods of selecting Configuration level:

•

 If you have already powered up, then follow the access instructions given in Chapter

3, Access levels.

Alternatively, press 

 and 

 together when powering up the controller.   This will

take you directly to the ‘

ConF’ password display.

 

When the ‘

ConF’ display appears, you must enter the

Configuration password (which is a number) in order to gain
access to Configuration level.

Enter the password using the 

 or 

 

buttons.

The configuration password is set to ‘

2’ when the controller

is shipped from the factory.

Once the correct password has been entered, there is a two
second delay, after which the lower readout will change to
‘

PASS’ indicating that access is now unlocked.

Note:  A special case exists if the password has been set to
‘

0’.  In this situation, access is permanently unlocked and the

lower readout will always show ‘

PASS’.

 to enter configuration.

(If an incorrect password has been entered and the controller

is still ‘locked’ then pressing 

 at this point will take you

to the ‘

Exit’ display with ‘no’ in the lower readout.  Simply

press 

 to return to the ‘

ConF’ display.)

You will obtain the first display of configuration.