Справочник Пользователя для Marathon Computer AACC 2000

AACC 2000 Carbon                                                                       Nov.  1, 1997

65

To leave the Configuration level and return to Operator level Press 

 until the

‘

Exit’ display appears.

Alternatively, pressing 

 and 

 together will take you directly to the ‘

Exit’ display

Use 

 or 

 

to select ‘

YES’.  After a two-

second delay, the display will blank and revert to
the Home display in Operator level.

The configuration parameters are arranged in lists as shown in the navigation diagram
in
Figure 6.1.

To step through the list headers, press the Page 

 button.

To step through the parameters within a particular list press the Scroll 

 button.

When you reach the end of the list you will return to the list header.

You can return directly to the list header at any time by pressing the Page 

 button.

Each box in the navigation diagram shows the display for a particular parameter.  The
upper readout shows the name of the parameter and the lower readout its value.  For a
definition of each parameter, see the Configuration Parameter Tables at the end of this

chapter.  To change the value of a selected parameter, use the 

 and 

 

buttons.

The navigation diagram shows all the lists headers and parameters that can, potentially,
be present in the controller.   In practice, those actually present will vary according to
the particular configuration choices you make.

There are TWO passwords.  These are stored in the Password configuration list and can
be selected and changed in the same manner as any other configuration parameter.

The password names are:

‘

ACC.P’ which protects access to Full level and Edit level

‘

cnF.P’ which protects access to Configuration level.