Справочник Пользователя для HP (Hewlett-Packard) 1900ux
Navigation
37
Changing the current SCSI IDs
READY > ADMIN* > SCSI IDS >
To change the SCSI IDs:
1. Follow the instruction in “
list of SCSI IDs is displayed.
2. Press NEXT until the setting you want to change displays, and then press
ENTER. The ID begins flashing.
3. Press NEXT or PREV until the new ID that you want displays and then press
ENTER.
4. Repeat
and
until you have changed all the IDs that need to be
updated.
5. Press NEXT until
UPDATE
displays, and then press ENTER.
6.
UPDATE
or
WAIT FOR UPDATE
and then
IDS SAVED
displays briefly.
— If the new settings do not conflict with other SCSI IDs on the bus,
SCSI
IDS
displays.
— If the new settings conflict with other IDs on the SCSI bus,
CONFLICT-ABORTED
displays briefly and then
VIEW IDS
displays.
Any changes entered are lost, and you must repeat the above steps to set a
new ID.
new ID.
7. Press CANCEL until
READY
displays.
8. Power off the jukebox and then power it back on to save the IDs to the
jukebox flash ROM.
Configuring the jukebox
lists the jukebox configuration options.