Справочник Пользователя для HP (Hewlett-Packard) 1900ux
Navigation
38
Table 5: Configuration options
Configuration Name
Description
Default
RECOVERY ON/OFF
Toggles between
ON
and
OFF
. If the configuration is set
to
ON
, the jukebox attempts to recover from errors; if the
configuration is set to
OFF
, the jukebox immediately
stops moving if an error condition occurs. The default
configuration is
RECOVERY ON
, and recovery should
remain
ON
under normal conditions.
RECOVERY ON
RESTORE DEFAULTS
Sets all jukebox configurations to default settings.
NA
CLEAR ODOMETERS
Sets all jukebox odometers to zero.
Note:
Used by service personnel only.
NA
DUAL PICKER
ON/OFF
ON/OFF
Toggles between
ON
and
OFF
. (The default setting is
DUAL PICKER ON
, and dual picker mode should
remain
ON
under normal conditions.) If the
configuration is set to
ON
, the jukebox runs with dual
picker (disk transport) addressing
ON
; if the
configuration is set to
OFF
, the jukebox runs with dual
picker (disk transport) addressing
OFF
.
DUAL PICKER
ON
ON
STARWARS ON/OFF
Should be set to
ON
during normal operation. Toggles
between
ON
and
OFF.
The
ON
configuration enables
the vertical sensors; the
OFF
configuration disables the
vertical sensors.
Note:
Used by service personnel only.
STARWARS ON
NEW PASSWORD
Allows you to change the numerical password required
to access the menu choices under the
ADMIN*
menu on
the jukebox control panel.
000-000-000
SCSI LOG ON/OFF
Should be set to
OFF
during normal operation. Toggles
between
ON
and
OFF
. Tracks internal SCSI states and
saves the information to a log.
Note:
Used by service personnel only.
SCSI LOG
OFF
OFF
SECURE MS ON/OFF
Toggles between
ON
and
OFF
. The
ON
configuration
disables loading and ejecting disks. The
OFF
configuration
enables loading and ejecting disks.
SECURE MS
OFF
OFF