Справочник Пользователя для Q-Logic 8200 SERIES
B – Command Reference
Commands
B-22
SN0054628-00 A
Q
See Also
"Disable Eth Command" on page B-9
"Enable Eth Command" on page B-10
"Modify Eth Command" on page B-13
"Show Eths Command" on page B-22
"Enable Eth Command" on page B-10
"Modify Eth Command" on page B-13
"Show Eths Command" on page B-22
Show Eths Command
Returns the configuration — ip address, subnet mask, and gateway — for the three
Ethernet connections: MGMT, HA1, and HA2. In addition, this command also
provides the MAC base address and the host name for the Ethernet connections.
Ethernet connections: MGMT, HA1, and HA2. In addition, this command also
provides the MAC base address and the host name for the Ethernet connections.
Syntax
show eths
See Also
"Disable Eth Command" on page B-9
"Enable Eth Command" on page B-10
"Modify Eth Command" on page B-13
"Show Eth Command" on page B-21
"Enable Eth Command" on page B-10
"Modify Eth Command" on page B-13
"Show Eth Command" on page B-21
Show Fan Command
Displays the status, either OK or Error, and the RPM of the specified fan.
Syntax
show fan
[fan number]
[*]
[*]
Keywords
show fan [fan number]
An integer between 1 through 10, inclusive.
An integer between 1 through 10, inclusive.
show fan [*]
Indicate all fans.
Indicate all fans.
Notes
If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The
RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.
RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.
See Also