Справочник Пользователя для Q-Logic 8200 SERIES
B – Command Reference
Commands
SN0054628-00 A
B-23
Q
Show Fans Command
Displays the status, either OK or Error, and the RPM for all 10 fans in the SANbox
SSP.
SSP.
Syntax
show fans
Notes
If the fan is a power supply fan (Fan 1 and Fan 3), the RPM is not available. The
RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.
RPM displays as 0 if the fan is not operational; as 1 if the fan is operational.
See Also
Show Group Command
Returns the list of user names that belong to the specified group name. The
groups defined for SANbox SSP are Administrator and Monitor.
groups defined for SANbox SSP are Administrator and Monitor.
Syntax
show group [group name]
Keywords
show group [group name]
Name of the group to which the user belongs: Administrator or Monitor.
Name of the group to which the user belongs: Administrator or Monitor.
Show Groups Command
Returns a list of the users assigned to each group that is defined for this SANbox
SSP. The groups defined for SANbox SSP are Administrator and Monitor.
SSP. The groups defined for SANbox SSP are Administrator and Monitor.
Syntax
show groups
See Also
Show ID Command
Returns the user account that was authenticated for the current telnet session.
Syntax
show id
Show Port Command
Returns diagnostic and status information for the specified port, 1-8 for
SANbox 8200-08 SSP/SANbox 8202-08 SSP or 1-16 for SANbox 8202-16 SSP.
See the sample output in the Examples section, below, for more information.
SANbox 8200-08 SSP/SANbox 8202-08 SSP or 1-16 for SANbox 8202-16 SSP.
See the sample output in the Examples section, below, for more information.
Syntax
show port
[port number]
*
*