Справочник Пользователя для Q-Logic 8200 SERIES

3 – Getting Started with SANbox SSP

Managing your Configuration

SN0054628-00  A

3-11

Q

 

When setting up a high-availability configuration, you must make sure that each 
host:

■

Includes installed and supported high-availability or multi-pathing software.

■

Is connected to both SANbox SSPs in the high-availability solution, and not 
connected to any other SANbox SSPs.

1. Connect one HBA port on each host to the switch labeled FC Switch A in the 

configuration diagram in 

, and add each of these ports to Zone 

front_A

.

2. Connect the other HBA port on each host to the switch labeled FC Switch B in 

the configuration diagram, and add each of these ports to Zone front_B.

3. To access the SVM GUI, start a web browser and point to the IP address you 

configured for the SVM appliance.

4. Use SVMAdministrator as the user name, and SVMAdministrator for the 

password the first time you access the SVM GUI. 

5. Configure a new password to use for the SVM GUI.

 

 for information about configuring storage, 

zoning your SAN, and managing your SAN using the SVM GUI. 

Use the SVM GUI to complete management tasks, such as creating storage pools, 
virtual volumes, and user-defined hosts (UDH); and assigning a SCSI personality 
to each UDH.