Справочник Пользователя для Mitsubishi Electronics DX-ZD6UE

18

No

No

No

No

No

Yes

Yes

Yes

Mirroring

Spanning

Yes

Yes

Yes

Is the MODE rotary switch set correctly?
Is the cable connected correctly?

Is the MODE rotary switch set 
correctly?

The HDDs of different capacities may 
be used. Check the HDD capacity.

Though the HDD corresponding to the 
illuminating indicator is not identified, 
operation can be continued. The S-ATA 
cable may not be connected properly or 
a problem may occur in the HDDs.

The HDD corresponding to the 
illuminating indicator is not identified. 
The S-ATA cable may not be connected 
properly or a problem may occur in the 
HDDs.

During synchronization, a problem 
occured in the source HDD and that 
HDD became unidentifiable.
The synchronization cannot be 
continued.

Both of the HDDs are not identified. 
The S-ATA cable may not be connected 
properly or a problem may occur in the 
HDDs.

In  the  case  that  the  HDD  1  or  HDD  2  indicator  on  the  front  panel  blinks  or  illuminates,  check  the  problem  in  the  HDD 
according to the chart below.