Справочник Пользователя для Mitsubishi Electronics DX-ZD6UE

19

If problems with the unit persist even after you followed the suggestions below, please stop using the unit, disconnect the 
power cord and contact the retailer from whom you purchased the unit. 

• Is the power cord properly plugged in? 
• Is the EXTERNAL CONTROL switch set to ON though the DC 12 V OUT 

terminal

 

of the recorder and the CONT IN terminal of this unit are not 

connected ?

• Is the USB cable connected correctly?
• Are the menus set correctly in the recorder?
• Is the number of recording devices connected within the limitation?
• Does the HDD 1 or HDD 2 indicator blink or illuminate red?
• Is the MODE rotary switch set correctly?
• Is the information of this unit displayed on the menu for registering the 

device?

  Is the correct data capacity displayed?
• Did you delete the management information before changing the HDD 

operation mode?

• Turn off the power. Turn on the power again after the internal temperature 

drops.

• Replace the fan with a new one. Ask your dealer to replace the fan.

The unit does not turn on.

This unit does not work 
correctly.

TEMP indicator illuminates.

FAN indicator illuminates.

The elapsed operating time, which can be a guide to know the periodic maintenance timing, is available in the menu of the 
recorder. Refer to the manual of the recorder. The indication of the operating time of the recorder may vary from the actual 
operating time. It is recommended to use this indication just for your reference.

When  this  unit  is  registered  as  a  Main  device,  the  elapsed  operating  time  of  this  unit  is  not  displayed.  (The  elapsed 
operating time of the recorder connected with this unit is displayed.)