Справочник Пользователя для HP (Hewlett-Packard) ProLiant BL495c G6

 

Component identification  55 

Accessing the redundant ROM 

If the system ROM is corrupted, the system automatically switches to the redundant ROM in most cases. If 

the system does not automatically switch to the redundant ROM, perform the following steps: 

1. 

Power down the server blade (on page 

2. 

Remove the server blade (on page 

3. 

Remove the access panel ("

4. 

Change positions 1, 5, and 6 of the system maintenance switch to on. 

5. 

Install the access panel. 

6. 

Install the server blade in the enclosure and power up the server blade. 

7. 

After the system beeps, repeat steps 1 through 3. 

8. 

Change positions 1, 5, and 6 of system maintenance switch to off. 

9. 

Repeat steps 5 and 6. 

If both the current and backup versions of the ROM are corrupt, return the system board for a service 

replacement. 
To switch to the backup ROM when the System ROM is not corrupt, use RBSU.  

 

HP c-Class Blade SUV Cable 

 

   

Item Connector  Description 

1 

Server blade 

For connecting to the SUV connector on the 

server blade front panel 

2 

Video 

For connecting a video monitor 

3 

USB  

For connecting up to two USB devices 

4 

Serial 

For trained personnel to connect a null modem 
serial cable and perform advanced diagnostic 

procedures