Справочник Пользователя для IBM XSERIES 220
Installing options
61
Do the following to remove the bezel:
1.
Review the information in “Before you begin” on page 58.
2.
Turn off the server and peripheral devices and disconnect all external cables and
power cords.
power cords.
3.
Remove the side cover (see “Removing the side cover” on page 59).
4.
Press the bezel-release latch at the top of the server to disconnect the top of the
bezel from the server.
bezel from the server.
5.
Release the two tabs at the top edge of the bezel and pull the top of the bezel
slightly away from the server.
slightly away from the server.
6.
Pull the bezel up to release the two tabs at the bottom edge of the bezel. Store the
bezel in a safe place.
bezel in a safe place.
Removing the support bracket assembly
When working with some options such as hard disk drives and microprocessors, you
must first remove the support bracket assembly to access the location of the option.
The support bracket assembly consists of a support bracket, an air baffle, and a fan.
must first remove the support bracket assembly to access the location of the option.
The support bracket assembly consists of a support bracket, an air baffle, and a fan.