Справочник Пользователя для Intel SE7520JR2

Revision 1.0 

of channel 2 of the 8254 timer. This may indicate a 
problem with system hardware.  

Interrupt Controller-1 error  

BIOS POST could not initialize the Master Interrupt 
Controller. This may indicate a problem with system 
hardware.  

Interrupt Controller-2 error  

BIOS POST could not initialize the Slave Interrupt 
Controller. This may indicate a problem with system 
hardware.  

 

CMOS Date/Time Not Set  

The CMOS Date and/or Time are invalid. This error can 
be resolved by readjusting the system time in AMIBIOS 
Setup.  

CMOS Battery Low  

CMOS Battery is low. This message usually indicates 
that the CMOS battery needs to be replaced. It could 
also appear when the user intentionally discharges the 
CMOS battery.  

CMOS Settings Wrong  

CMOS settings are invalid. This error can be resolved by 
using AMIBIOS Setup.  

CMOS Checksum Bad  

CMOS contents failed the Checksum check. Indicates 
that the CMOS data has been changed by a program 
other than the BIOS or that the CMOS is not retaining its 
data due to malfunction. This error can typically be 
resolved by using AMIBIOS Setup.  

 

Keyboard Error  

Keyboard is not present or the hardware is not 
responding when the keyboard controller is initialized.  

PS2 Keyboard not found 

PS2 Keyboard support is enabled in the BIOS setup but 
the device is not detected. 

PS2 Mouse not found 

PS2 Mouse support is enabled in the BIOS setup but the 
device is not detected. 

Keyboard/Interface Error  

Keyboard Controller failure. This may indicate a problem 
with system hardware.  

Unlock Keyboard 

PS2 keyboard is locked. User needs to unlock the 
keyboard to continue the BIOS POST. 

System Halted 

The system has been halted. A reset or power cycle is 
required to reboot the machine. This message appears 
after a fatal error has been detected. 

Warning! Unsupported USB device found and disabled! 

This message is displayed when a non-bootable USB 
device is enumerated and disabled by the BIOS. 

Warning! Port 60h/64h emulation is not supported by this 
USB Host Controller! 

This message is displayed to indicate that port 60h/64h 
emulation mode cannot be enabled for this USB host 
controller. This condition occurs if USB KBC emulation 
option is set for non-SMI mode. 

Warning! EHCI controller disabled. It requires 64bit data 
support in the BIOS. 

This message is displayed to indicate that EHCI 
controller is disabled because of incorrect data structure. 
This condition occur if the USB host controller needs 64-