Справочник Пользователя для Intel SE7520JR2
Functional Architecture
Intel® Server Board SE7520JR2
Revision 1.0
C78844-002
58
3.4.4 SCSI
Support
The SCSI sub-system consists of the LSI 53C1030 Dual Channel Ultra320 SCSI controller, one
internal 80-pin connector (SCSI Channel A), one external high 80-pin density SCSI connector
(SCSI channel B), and on-board termination for both SCSI channels.
internal 80-pin connector (SCSI Channel A), one external high 80-pin density SCSI connector
(SCSI channel B), and on-board termination for both SCSI channels.
3.4.4.1
LSI* 53C1030 Dual Channel Ultra320 SCSI Controller
The LSI53C1030 is a PCI-X to Dual Channel Ultra320 SCSI Multifunction Controller that
supports the PCI Local Bus Specification, Revision 2.2, and the PCI-X Addendum to the PCI
Local Bus Specification, Revision 1.0a.
supports the PCI Local Bus Specification, Revision 2.2, and the PCI-X Addendum to the PCI
Local Bus Specification, Revision 1.0a.
The LSI53C1030 supports up to a 64-bit, 133 MHz PCI-X bus. DT clocking enables the
LSI53C1030 to achieve data transfer rates of up to 320 megabytes per second (MB/s) on each
SCSI channel, for a total bandwidth of 640 MB/s on both SCSI channels.
LSI53C1030 to achieve data transfer rates of up to 320 megabytes per second (MB/s) on each
SCSI channel, for a total bandwidth of 640 MB/s on both SCSI channels.
SureLINK* Domain Validation detects the SCSI bus configuration and adjusts the SCSI transfer
rate to optimize bus interoperability and SCSI data transfer rates. SureLINK Domain Validation
provides three levels of domain validation, assuring robust system operation.
rate to optimize bus interoperability and SCSI data transfer rates. SureLINK Domain Validation
provides three levels of domain validation, assuring robust system operation.
The LSI53C1030 integrates two high-performance SCSI Ultra320 cores and a 64-bit, 133 MHz
PCI-X bus master DMA core. The LSI53C1030 employs three ARM* ARM966E-S processors to
meet the data transfer flexibility requirements of the Ultra320 SCSI, PCI, and PCI-X
specifications. Separate ARM processors support each SCSI channel and the PCI/PCI-X
interface.
PCI-X bus master DMA core. The LSI53C1030 employs three ARM* ARM966E-S processors to
meet the data transfer flexibility requirements of the Ultra320 SCSI, PCI, and PCI-X
specifications. Separate ARM processors support each SCSI channel and the PCI/PCI-X
interface.
These processors implement the LSI* Logic Fusion-MPT* architecture, a multithreaded I/O
algorithm that supports data transfers between the host system and SCSI devices with minimal
host processor intervention. Fusion-MPT technology provides an efficient architecture that
solves the protocol overhead problems of previous intelligent and non-intelligent adapter
designs. LVDlink* technology is the LSI Logic implementation of Low Voltage Differential (LVD)
SCSI. LVDlink transceivers allow the LSI53C1030 to perform either Single-Ended (SE) or LVD
transfers.
algorithm that supports data transfers between the host system and SCSI devices with minimal
host processor intervention. Fusion-MPT technology provides an efficient architecture that
solves the protocol overhead problems of previous intelligent and non-intelligent adapter
designs. LVDlink* technology is the LSI Logic implementation of Low Voltage Differential (LVD)
SCSI. LVDlink transceivers allow the LSI53C1030 to perform either Single-Ended (SE) or LVD
transfers.
The LSI* 53C1030 SCSI controller implements a regular SCSI solution or a RAID On
MotherBoard (ROMB) solution. This RAID functionality is included in the LSI option rom and
allows the user to select either Integrated Mirroring (IME) or Integrated Striping (IS) RAID mode.
The system BIOS provides a setup option to allow the user to select one of these two modes
MotherBoard (ROMB) solution. This RAID functionality is included in the LSI option rom and
allows the user to select either Integrated Mirroring (IME) or Integrated Striping (IS) RAID mode.
The system BIOS provides a setup option to allow the user to select one of these two modes
The LSI Logic BIOS Configuration Utility or the IM DOS Configuration Utility is used to configure
the IME and IS firmware attributes. Using the LSI Logic BIOS and drivers adds support of
physical device recognition for the purpose of Domain Validation and Ultra320 SCSI expander
configuration. Host-based status software monitors the state of the mirrored drives and reports
error conditions as they arise.
the IME and IS firmware attributes. Using the LSI Logic BIOS and drivers adds support of
physical device recognition for the purpose of Domain Validation and Ultra320 SCSI expander
configuration. Host-based status software monitors the state of the mirrored drives and reports
error conditions as they arise.
3.4.4.1.1
53C1030 Summary of Features
The Ultra320 SCSI features for the LSI53C1030 include:
•
Double transition (DT) clocking
•
Packetized protocol
•
Paced transfers