Справочник Пользователя для Intel SE7520JR2

Revision 1.0 

↔ 

Select Menu 

The left and right arrow keys are used to move between the major menu pages. The 
keys have no affect if a sub-menu or pick list is displayed. 

Tab 

Select Field 

The Tab key is used to move between fields. For example, Tab can be used to move 
from hours to minutes in the time item in the main menu. 

- 

Change Value 

The minus key on the keypad is used to change the value of the current item to the 
previous value. This key scrolls through the values in the associated pick list without 
displaying the full list.  

+ 

Change Value 

The plus key on the keypad is used to change the value of the current menu item to the 
next value. This key scrolls through the values in the associated pick list without 
displaying the full list. On 106-key Japanese keyboards, the plus key has a different 
scan code than the plus key on the other keyboard, but will have the same effect. 

F9 

Setup Defaults 

Pressing F9 causes the following to appear: 
 

 

Load Setup Defaults? 

[OK]        [Cancel] 

 
If “OK” is selected and the Enter key is pressed, all setup fields are set to their default 
values. If “Cancel” is selected and the Enter key is pressed, or if the ESC key is 
pressed, the user is returned to where they were before F9 was pressed without 
affecting any existing field values. 

F7 

Discard Changes 

Pressing F7 causes the following message to appear: 
 

Discard Changes? 

[OK]        [Cancel] 

 
If “OK” is selected and the Enter key is pressed, all changes are not saved and setup is 
exited. If “Cancel” is selected and the Enter key is pressed, or the ESC key is pressed, 
the user is returned to where they were before F7 was pressed without affecting any 
existing values. 

F10 

Save Changes and 
Exit 

Pressing F10 causes the following message to appear: 
 

Save configuration changes and exit setup? 

[OK]        [Cancel] 

 
If “OK” is selected and the Enter key is pressed, all changes are saved and setup is 
exited. If “Cancel” is selected and the Enter key is pressed, or the ESC key is pressed, 
the user is returned to where they were before F10 was pressed without affecting any 
existing values. 

  

The BIOS Setup utility is accessed by pressing the <F2> hotkey during POST 

The first screen displayed when entering the BIOS Setup Utility is the Main Menu selection 
screen. This screen displays the major menu selections available. The following tables describe 
the available options on the top level and lower level menus. Default values are shown in bold 
text.