Справочник Пользователя для Intel SE7520JR2

Revision 1.0 

nth Drive 

Varies 

Specifies the boot sequence from the available 
devices. 

Varies based on system configuration. 

Security Settings 
Administrator 
Password is 

N/A 

Install / Not installed Informational 

display. 

User Password is 

N/A 

Install / Not installed 

Informational display. 

Set Admin 
Password 

N/A 

Set or clear Admin password 

Pressing enter twice will clear the 
password. This option is grayed 
our when entering setup with a 
user password. 

Set User Password  N/A 

Set or clear User password 

Pressing enter twice will clear the 
password. 

User Access Level 

No Access 
View Only 
Limited 
Full Access 

LIMITED: allows only limited fields 
to be changed such as Date 
and Time. 
NO ACCESS: prevents User 
access to the Setup Utility. 
VIEW ONLY: allows access to the 
Setup Utility but the fields can not 
be changed. 
FULL: allows any field to be 
changed.  

This node is grayed out and 
becomes active only when Admin 
password is set. 
 

Clear User 
Password 

N/A 

Immediately clears the user 
password. 

Admin uses this option to clear 
User password (Admin password 
is used to enter setup is required). 
This node is gray if Administrator 
password is not installed. 

Fixed disk boot 
sector protection 

Disabled 
Enabled 

Enable/Disable Boot Sector Virus 
Protection. 

 

Password On Boot 

Disabled 
Enabled 

If enabled, requires password 
entry before boot. 

This node is grayed out if a user 
password is not installed. 

Secure Mode Timer  1 minute 

2 minutes 
5 minutes 
10 minutes 
20 minutes 
60 minutes 
120 minutes 

Period of key/PS/2 mouse 
inactivity specified for Secure 
Mode to activate. A password is 
required for Secure Mode to 
function. Has no effect unless at 
least one password is enabled. 

This node is grayed out if a user 
password is not installed. 

Secure Mode Hot 
Key (Ctrl-Alt- ) 

[L] 
[Z] 
 

Key assigned to invoke the secure 
mode feature. Cannot be enabled 
unless at least one password is 
enabled. Can be disabled by 
entering a new key followed by a 
backspace or by entering delete. 

This node is grayed out if a user 
password is not installed.