Справочник Пользователя для Intel S3420GP
Connector/Header Locations and Pin-outs
IntelP®P Server Board S3420GP TPS
Table 39. System Status LED Indicator States
Color
State
Criticality
Description
Green
Solid on
Ok
System booted and ready
Green
~1 Hz blink
Degraded
System degra
on
d asserted.
on
erted.
on
ed.
an
ystem cooling maintained.
his
ndant systems.
Pow r supply predictive failure.
Pow
redundancy lost. This does not apply to non-
redundant systems.
ser no
longer has spared DIMMs indicating a redundancy lost
condition. Corresponding DIMM LED should light up.
condition. Corresponding DIMM LED should light up.
1
ded:
N -critical
temperature threshol
N -critical voltage threshold ass
N -critical fan threshold assert
F
T
T
redundancy lost, sufficient s
does not apply to non-redu
e
er supply
e
er supply
Correctable errors over a threshold of 10 and migrating to a
spare DIMM (memory sparing). This indicates the u
spare DIMM (memory sparing). This indicates the u
Amber
~1 Hz blink
Non-critical
Non-fatal alarm – system is likely to fail:
CATERR
asserted.
Critical
temperature threshold asserted.
Critical voltage threshold asserted.
Critical fan threshold asserted.
VRD hot asserted.
SM
t asserted.
I Timeou
Amber
Solid on
Critical, non-
recoverable
Fatal alarm – system has failed or shutdown:
Thermtrip
asserted.
Non-recoverable temperature threshold asserted.
Non-recoverable voltage threshold asserted.
undancy lost, insufficient system cooling. This does
not apply to non-redundant systems.
Power fault / Power Control Failure.
Fan red
Fan red
Off
N/A
Not ready
AC power off, if no degraded, non-critical, critical, or non-recoverable
conditions exist.
conditions exist.
Notes:
1. The BIOS detects these conditions and sends a Set Faul
1. The BIOS detects these conditions and sends a Set Faul
tegrated BMC to provide
the contribution to the
stem
2. Support for upper non-critical limit is not provided in the default SDR configuration. However, if a user does
enable this threshold in the SDR, then the system status
ibed.
There is no precedence or lock-out mechanism for the control sources. When a new request
arrives, all previous requests are terminated. For example, if the chassis ID LED is blinking and
the chassis ID button is pressed, then the chassis ID LED changes to solid on. If the button is
pressed again with no intervening commands, the chassis ID LED turns off.
t Indication command to the In
sy
status LED.
LED should behave as descr
Revision
1.0
Intel order number E65697-003
70