Справочник Пользователя для Intel S3420GP

Force Update 

2-3 

Integrated BMC Firmware Force Update Mode – Enabled 

The CMOS Clear (J1F5) and Password Reset (J1F2) recovery features are designed such that 
the desired operation can be achieved with minimal system downtime. The usage procedure for 
these two features has changed from previous generation Intel server boards. The following 
procedure outlines the new usage model. 

To clear the CMOS, perform the following steps: 

1.  Power down the server. Do not unplug the power cord. 

2.  Open the server chassis. For instructions, see your server chassis documentation. 

3.  Move jumper (J1F5) from the default operating position (covering pins 1 and 2) to the 

reset / clear position (covering pins 2 and 3). 

4.  Wait five seconds. 

5.  Remove AC power. 

6.  Move the jumper back to the default position (covering pins 1 and 2). 

7.  Close the server chassis. 

8.  Power up the server. 

The CMOS is now cleared and can be reset by going into the BIOS setup. 

To clear the password, perform the following steps: 

1.  Power down the server. Do not unplug the power cord. 

2.  Open the chassis. For instructions, see your server chassis documentation. 

3.  Move jumper (J1F2) from the default operating position (covering pins 1 and 2) to the 

password clear position (covering pins 2 and 3). 

4.  Close the server chassis. 

5.  Power up the server and wait 10 seconds or until POST completes. 

6.  Power down the server.