Справочник Пользователя для Intel S3420GP

7.  Open the chassis and move the jumper back to the default position (covering pins 1 and 

2). 

8.  Close the server chassis. 

9.  Power up the server. 

The password is now cleared and can be reset by going into the BIOS setup. 

When performing the standard Integrated BMC firmware update procedure, the update utility 
places the Integrated BMC into an update mode, allowing the firmware to load safely onto the 
flash device. In the unlikely event the Integrated BMC firmware update process fails due to the 
Integrated BMC not being in the proper update state, the server board provides an Integrated 
BMC Force Update jumper (J1A2), which forces the Integrated BMC into the proper update 
state. The following procedure should be completed in the event the standard Integrated BMC 
firmware update process fails.  

1.  Power down and remove the AC power cord. 

2.  Open the server chassis. For instructions, see your server chassis documentation. 

3.  Move jumper from the default operating position (covering pins 1 and 2) to the enabled 

position (covering pins 2 and 3). 

4.  Close the server chassis. 

5.  Reconnect the AC cord and power up the server. 

6.  Perform the Integrated BMC firmware update procedure as documented in the 

README.TXT file that is included in the given Integrated BMC firmware update package. 
After successful completion of the firmware update process, the firmware update utility 
may generate an error stating that the Integrated BMC is still in update mode. 

7.  Power down and remove the AC power cord. 

8.  Open the server chassis. 

9.  Move jumper from the enabled position (covering pins 2 and 3) to the disabled position 

(covering pins 1 and 2). 

10. Close the server chassis. 

11. Reconnect the AC cord and power up the server. 

When performing the standard ME force update procedure, the update utility places the ME into 
an update mode, allowing the ME to load safely onto the flash device. In the unlikely event ME