Справочник Пользователя для Intel DQ35MP

 

71 

®

 

1.  Assemble your system and attach one or more SATA hard drives to the SATA 

connectors. 

2.  Enter system BIOS Setup by pressing the <F2> key after the Power-On-Self-Test 

(POST) memory tests begin.  

3.  Go to Advanced   Drive Configuration   Configure SATA as; ensure that 

RAID is selected.  

4.  Then save your settings by pressing <F10>. 

1.  Upon re-boot, you will see the following Intel Matrix Storage Manager option ROM 

status message on the screen:  Press <Ctrl-I> to enter the RAID 
Configuration Utility

.  Press <Ctrl-I> and enter the RAID Configuration Utility. 

2.  In the Intel Matrix Storage Manager option ROM Main Menu, select option #1: 

Create RAID Volume

.  Enter a volume name and press <Enter>. 

NOTE:  The RAID Volume name must be in English alphanumeric ASCII characters. 

3.  Use the arrow keys to select RAID 0 or RAID 1 (if only two SATA drives are 

available), RAID 5 and RAID 10 (these options will only appear if three or four 
SATA drives are installed respectively).  Press <Enter> once you have selected the 
RAID LEVEL.  

4.  Select the drives to be used in the RAID array (only if there are more than two 

drives available) and press <Enter>.  

5.  Select the strip size, if necessary, and press <Enter>.   
6.  Enter the size of the volume (if you enter less than the maximum volume size, you 

can then create a second RAID array on the remaining portion of your volume) and 
press <Enter>.   

7.  Finally, press <Enter> to Create Volume.  
8.  Exit the Option ROM user interface by pressing <Esc> or going to the EXIT option 

in the MAIN MENU.