Справочник Пользователя для Intel DQ35MP

 

73 

Intel Rapid Recover technology utilizes RAID 1 (mirroring) functionality to copy data 
from a designated master drive to a designated recovery drive. The master and 
recovery drives must span 100 percent of the available hard drive space of an array, 
and only one recovery volume can be present on a system.  

You can select whether you want the master drive data to be copied to the recovery 
drive continuously or on request.  When using the Continuous Update policy, changes 
made to the data on the master drive while the recovery drive is disconnected or 
offline are automatically copied to the recovery drive when it is reconnected. 

When using the Update On Request policy, the master drive data can be restored to a 
previous state by copying the data on the recovery drive back to the master drive. 

 

Intel Rapid Recover Technology can be Enabled or Disabled in the system BIOS menu. 
To enable Intel Rapid Recover Technology, complete following steps: 
1.  Enter the BIOS menu by pressing the <F2> key early during system POST. 
2.  Go to Advanced   Drive Configuration.  
3.  For the setting Intel Rapid Recover Technology, select to enable it.  
4.  For the setting Configure SATA as, ensure it is set to RAID. 

 

5.  Exit and save settings.  Proceed to “Creating a Recovery Volume.”