Справочник Пользователя для Samsung 3.5" hard disk drives

INSTALLATION 
 

SpinPoint V40 Product Manual

 

20

 
The SpinPoint V40 hard disk drive can be installed in an AT-compatible system in two ways: 
 

•

  To install the drive with a motherboard that contains a 40-pin AT-bus connector, connect the drive to the 

motherboard using a 40-pin ribbon cable.  Ensure that pin 1 of the drive is connected to pin 1 of the 

motherboard connector. 

 

•

  To install the drive in a system without a 40-pin, AT-bus connector on its motherboard, an AT-bus 

adapter kit is required.  The kit includes an adapter board and a ribbon cable to connect the board to the 

drive. 

 
Figure 4-7 indicates the cable and power cord connections required for proper drive installation. 
 

 

 

Figure 4-7  DC Power Connector and AT-Bus Interface Cable Connections