Справочник Пользователя для Lucent Technologies R5SI

Issue 1

April 1997

Maintenance Commands and Trouble-Clearing Aids 

Page 8-607

test journal-printer 

If the command entered is in conflict with another currently executing command, 
then a message will be displayed showing the login id of the conflicting user and 
the conflicting command. The message is as follows:

’login id’:’command’ has a command conflict

If during the execution of a command a resource problem occurs that requires 
the user to restart the command, then the following message will be displayed:

Command resources busy;

Press CANCEL to clear, and then resubmit

If all of the available maintenance resources are currently in use, then the 
following message will be displayed:

All maintenance resources busy; try again later

The responses will be displayed on a test-by-test basis with one line of data 
displayed for each test result.

For the following output example, assume that the command that was entered 
was "test journal-printer pms-log".

Port

Not applicable. Will always be blank.

Maintenance Name

The type of maintenance object that is being tested. If testing the 
pms-log printer link the maintenance name will be PMS-PRNT, else 
if testing the wakeup-log printer link the maintenance name will be 
JNL-PRNT.

Alt. Name

Not applicable. Will always be blank.

Test No

The actual test that is being executed.

Result

The result of the individual test - "PASS", "ABORT", "FAIL", 
"DISABLED".

Error Code

A system-generated number that tells why the test failed or 
aborted. A detailed list of the codes according to "Test No." is 
provided for each MO.

 
 test journal-printer pms-log short

                               TEST RESULTS

   Port    Maintenance Name  Alt. Name Test No. Result       Error Code
           JRNL-LINK                   215      PASS

 Command Successfully Completed