Справочник Пользователя для Oregon Scientific RAR186
EN
6
on a wall with a nail.
REMOTE SENSOR (THN122)
This product is shipped with a THN122 Thermo Sensor
BATTERIES
Batteries are not supplied with this product. You will need
to purchase 2 x UM-3 (AA) 1.5V alkaline batteries for
the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries
for the remote sensor.
to purchase 2 x UM-3 (AA) 1.5V alkaline batteries for
the main unit, and 2 x UM-4 (AAA) 1.5V alkaline batteries
for the remote sensor.
Insert batteries before first use, matching the polarity as
shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
shown in the battery compartment. For best results,
install batteries in the remote sensor before the main
unit. Press RESET after each battery change.
Do not use rechargeable batteries.
shows on LCD display when batteries are low.
CHANGE SETTINGS
NOTE
1.
Press and hold MODE for 2 seconds to enter setting
mode.
mode.
2.
Press UP or DOWN to change settings.
3.
Press MODE to confirm.
TABLE STAND OR WALL MOUNT
Product can stand on detachable base or be mounted
that collects Temperature data. Data can be collected
from up to 3 sensors. Additional sensors sold separately.
from up to 3 sensors. Additional sensors sold separately.
SETUP SENSOR
Open the remote sensor battery compartment with a