Справочник Пользователя для Oregon Scientific RAR186

EN

8

CHANNEL for 2 seconds.

If  the  sensor  is  still  not  found,  check  the

batteries, obstructions, and remote unit location.

Signals  from  household  devices  such  as

doorbells, electronic garage doors, and home security
systems may cause temporary reception failure. This is
normal and does not affect general product performance.
The reception will resume once the interference ends.

This product shows the current time, time zone, and day

--- shows in Temp
Areas

ICON

DESCRIPTION

Main unit is searching for
sensors.

At least 1 channel has
been found.
Channel 1 is selected (number
will change depending on the
sensor you select)

The selected sensor cannot
be found. Search for the
sensor or check batteries.

of week in English, German, Italian, or French.

Manually  set  the  clock  following  the  "Set  Clock"
instructions (below).

1.

Press and hold MODE for 2 seconds.  The Clock
Area will blink.

2.

Select the hour, minute, date, month, language, day
and time zone offset (-12 to +12).  Press UP or
DOWN to change the setting. Press MODE to
confirm.

The Language settings are (E) English, (D)

German, (F) French, and (I) Italian

Press  MODE  to  toggle  between  Clock  with  Seconds,
Clock  with  Weekday,  Clock  with  Weekday  and  Zone
Time, and Zone Time with Weekday and Zone Calendar.

This product is equipped with a 2-minute crescendo alarm.

The reception icon shown in the Temperature Area
shows the status.

To  search  for  a  sensor,  press  and  hold  MEM  and