Справочник Пользователя для Oregon Scientific RAR186
EN
9
1.
Press ((.)).
2.
Press and hold ((.)) again for 2 seconds. The Alarm
settings will blink.
settings will blink.
3.
Select the hour and minute. Press UP or DOWN to
change settings. Press ((.)) to confirm.
change settings. Press ((.)) to confirm.
To set second alarm perform step 1 twice,
then perform steps 2 and 3.
ACTIVATE ALARM
Press ALARM ON / OFF to activate, deactivate and toggle
between alarm settings. (Alarm symbol with #1 or #2)
shows in Calendar / Alarm Area when alarm(s) are
activated.
between alarm settings. (Alarm symbol with #1 or #2)
shows in Calendar / Alarm Area when alarm(s) are
activated.
TEMPERATURE
This product can display the following temperature
information:
• Current, minimum and maximum readings
• Trend line for remote sensor
Data is collected by the remote sensors and displayed
every 30 seconds.
every 30 seconds.
SELECT TEMPERATURE UNIT
Slide the
°
C /
°
F switch into the desired location. The
switch is located on the back of the product.
SELECT SENSOR CHANNEL
Press CHANNEL to switch between sensors 1 - 3.
The icon shows the selected sensor.
MINIMUM / MAXIMUM RECORDS
Press MEM to toggle between current, maximum (MAX)
and minimum (MIN) records for the indoor reading and
and minimum (MIN) records for the indoor reading and
VIEW ALARM SETTINGS
The Alarm Time and On / Off status will show in the
Calendar / Alarm Area.
Calendar / Alarm Area.
Press ((.)) again for the second alarm time and status.
SET DUAL ALARM
NOTE
Designated
Display
Display
Remote
Display
Channel 1
Kineticwave
Icon
Icon
Remote
Display
Channel 2
Remote
Display
Channel 3