Справочник Пользователя для Zebra Technologies ZT210

Troubleshooting
Error Messages

P1048261-004  

8/22/12

STATUS light steady yellow

The printhead may be hot enough to cause 

severe burns. Allow the printhead to cool.

The printhead is over 
temperature.

Allow the printer to cool. 
Printing automatically resumes 
when the printhead elements 
cool to an acceptable operating 
temperature.
If this error persists, consider 
changing where the printer is 
located or using a slower print 
speed.

STATUS light steady yellow
The printer shows one of these messages 
or cycles between them.

An improperly connected printhead data or 

power cable can cause these error messages. The 
printhead may be hot enough to cause severe burns. 
Allow the printhead to cool.

The printhead data cable is not 
properly connected.

Call a service technician to 
hook up the printhead 
properly.

The printhead has a faulty 
thermistor.

Call a service technician to 
replace the printhead.

STATUS light flashing yellow

An improperly connected printhead data or 

power cable can cause this error message. The 
printhead may be hot enough to cause severe burns. 
Allow the printhead to cool.

The printhead temperature is 
approaching its lower 
operating limit.

Continue printing while the 
printhead reaches the correct 
operating temperature. If the 
error remains, the environment 
may be too cold for proper 
printing. Relocate the printer 
to a warmer area.

The printhead data cable is not 
properly connected.

Call a service technician to 
hook up the printhead 
properly.

The printhead has a faulty 
thermistor.

Call a service technician to 
replace the printhead.