Справочник Пользователя для Sierra Wireless 300
DART 300 Migration Guide
Comparative AT Command Reference
2110291 Rev 1.0
Page 32
Table 4-8: S-Registers (continued)
Register
DART 200
DART 300
52
PAD Primary Forwarding Character 2
Not supported. The DART 300 has only one
Primary Forwarding Character (+WS64).
Primary Forwarding Character (+WS64).
53
IP Address and port number of current
TCP/UDP session partner.
TCP/UDP session partner.
Not supported. The IP address can be
obtained with +WVCALLERIP. The port
number is not available.
obtained with +WVCALLERIP. The port
number is not available.
57
State information (bitmapped)
Not supported. The various elements reported
by the DART 200 can be queried on the
DART 300 using the command equivalents:
by the DART 200 can be queried on the
DART 300 using the command equivalents:
b0,1
=
+WS56?
(registration
status)
b2,3
=
not supported (Use DCD)
b4,5
=
+WS173?
(auto-registration)
b6
=
not supported (auto-SLIP)
b7
=
+WPRSSI
(coverage/
chan
acquisition.)
56
Last registration result code received from the
network.
network.
Not supported. Registration progress is
available from register +WS201. The values
have different meanings from those of the
DART 200.
available from register +WS201. The values
have different meanings from those of the
DART 200.
58
PAD status (bitmapped)
Not supported. The various elements reported
by the DART 200 can be queried on the
DART 300 using the command equivalents:
by the DART 200 can be queried on the
DART 300 using the command equivalents:
\T
=
+WS70?
(PAD
frwd
timer)
\M
=
+WS63?
(Pri. frwd. char)
\Q
= -none-
(Always H/W flow)
\F
=
+WS63?
(Pri. frwd. char)
\O
= -none-
(no Telnet support)
62
Connection Failure
Not supported.
63
Connection Failure Probable Cause
Not supported.
70
PING Wait Timeout
Not supported.
71
PING Data Length
Not supported.
77
Telnet Escape Character
Not supported.
78
Telnet Starting Terminal Type
Not supported.
79
Graceful TCP Shutdown (bitmapped)
Not supported. The DART 300 always
attempts graceful shutdown of TCP sessions.
attempts graceful shutdown of TCP sessions.
82
Friends Only and UDP Controls (bitmapped)
(Service Provider Mode)
(Service Provider Mode)
Friends Only and UDP Controls
The features are available with various
commands as follows:
commands as follows:
b0
=
+WVFRIEND=
(friends only)
b1
=
not supported
b2
=
+WS217
(UDP receive lock)
b3
=
not supported
b4
=
not supported
Client sessions only support traffic with the
destination server.
destination server.