Справочник Пользователя для Sierra Wireless 300

DART 300 Migration Guide 

 

Comparative AT Command Reference 

 

2110291 Rev 1.0 

 

Page 34 

This section provides a cross reference from the DART 300’s +WS register set to the equivalent 
DART 200 commands or registers. 

 for server side and T or P dial modifier for 

client side. 

PAD – Packet Service 

Normalized Signal Strength 

bit 0 

Network Registration Status 

Not supported. 

Time Independent Escape Sequence (TIES) 

Command F (Echo Data State). 

PAD Local On-Line Echo 

for bit 0 equivalence (enabling) 

for bit 1 equivalence (inclusion) 

PAD Forwarding Character Feature Mask 

 or S52; the DART 300 only supports one 

forwarding character. 

PAD Primary Forwarding Character 

 to set the timer. 

 to enable or disable use. 

PAD Inter-Character Timer 

Not supported. 

PAD Input Buffer Editing Enable 

Not supported. 

PAD Input Buffer Backspace Character 

Not supported.  Fixed at 1924. 

PAD Maximum Packet Length 

Registration Control 
Supported via \R4 for auto-registration and 
\R2

 for “manual” registration (automatic with 

dial).  Settings can be queried at S57. 

Registration Mode 

Supported with \N. 

Channel Side A/B Preference 

Not supported. 

CDPD Sleep Idle Time 

Supported using the \S command. 

Auto-register NEI Index 

Not supported. 

Registration Wait Status 

Supported using the \S command. 

Active NEI Index 

Supported in register S13. 

Registration Wait Time 

Supported in register S100. 

Current Channel Number 

Result codes are reported in S56. 
Registration progress is reported in S126. 

Registration Progress and Result Codes 

Not supported. Radio 

Temperature 

Supported in register S110. 

Cell Number 

Supported by command *L. 

Listening Port 

Not supported. Friend 

List 

Index 

Register S83 contains the timer. 
Bit 2 of S82 enables the feature. 

UDP Server Receive Lock