Справочник Пользователя для Multitech MT5634ZBA-V92

If you use Windows 95 or above, you must install the modem
driver. The MTMoh Modem on Hold program is installed at the
same time (see Chapter 7 in the 

User Guide). If you use another

operating system, please see the 

User Guide.

1. Make sure your modem is connected properly, and then

turn on your computer. Windows should detect your new
modem and open the Install New Modem wizard.

Note: If Windows cannot find a modem, your modem may
be turned off, it may be plugged into the wrong connector
on your computer, or the serial cable may be faulty. See
“None of the LEDs Light When the Modem Is Turned On”
and “The Modem Does Not Respond to Commands” in
Chapter 8 of the 

User Guide, “Solving Problems.”

2. In the Install New Modem wizard, select Don’t detect my

modem; I will select it from a list, and then click Next. A
dialog box with a list of manufacturers and a list of modem
models appears.

3. Insert the MultiModemZBA compact disc  into your CD-ROM

drive, and then click Have Disk. (If the disc menu appears,
you may either close it or ignore it for now.)

4. In the Install from Disk dialog box, select the drive the

disc is in, and then click OK.