Справочник Пользователя для Multitech MT5634ZBA-V92
MultiModemZBA Quick Start Guide
7
Telephone Connection
If you want to connect a telephone to the same line as the
modem, plug it into the modem’s PHONE jack.
modem, plug it into the modem’s PHONE jack.
Note: The PHONE jack is not interchangeable with the LINE
jack. Do not plug the telephone into the LINE jack or the line
cable into the PHONE jack.
jack. Do not plug the telephone into the LINE jack or the line
cable into the PHONE jack.
Power Connection
The power switch is located on the right side of the modem.
Make sure it is set to OFF. Plug the the universal power supply
into the PWR jack on the modem. Then plug one end of the
country-specific power supply cord into the universal power
supply and the other end into a power outlet or power strip.
Make sure it is set to OFF. Plug the the universal power supply
into the PWR jack on the modem. Then plug one end of the
country-specific power supply cord into the universal power
supply and the other end into a power outlet or power strip.
Note: Use only the power supply supplied with the modem.
Use of any other power supply voids the warranty and can
damage the modem.
Use of any other power supply voids the warranty and can
damage the modem.
Power-On Test
Test the modem by turning it on. When you turn it on, the mo-
dem performs a diagnostic self-test, after which the 56 indica-
tor should light. If this does not happen, check that the power
switch is on, the power supply is solidly connected, and the AC
outlet is live. If these measures do not work, see Chapter 8 of
the
dem performs a diagnostic self-test, after which the 56 indica-
tor should light. If this does not happen, check that the power
switch is on, the power supply is solidly connected, and the AC
outlet is live. If these measures do not work, see Chapter 8 of
the
User Guide, “Solving Problems.”