Справочник Пользователя для Packard Bell C3

Packard Bell EasyNote C3 Disassembly Manual

Removing the LCD Module

To remove the LCD Module first remove the battery (see

remove the keyboard (see

), then perform the following steps:

1. Remove the screws retaining the Heat Plate as shown in Fig. 11

Fig. 11 Removing the screws retaining the Heat Plate

2. Flip over the base unit and release the screws retaining the LCD Module.

Fig. 12 Bottom screws retaining the LCD Module

3. Release the screws on the system rear side as shown in Fig. 13

Fig. 13 Rear screws retaining the LCD Module

M2.5x7 silver

M2.5x9 silver